|
This is a DLE 55 cc Gas Engine impored to Australia by DL Engines Australia.
Includes-
DLE-55cc Engine
Version 2.0 Electronic (Auto Advancing) Ignition & Spiral Cable Wraps
Walbro Pump Carburettor & Composite Throttle Arm Extension
WE SUPPLY A REAL Japanese NGK CM6 Spark Plug
Spare Spark Plug Cap Grounding Spring
Muffler, Gasket and Bolts
Machined Engine Mounting Standoffs (68mm long) and Bolts.
Powered by DL Stickers & DLE Stickers.
DL Engines Australia Instructions & Warranty Sheet.
Printed Mounting Template
We provide the Best No Fuss Warranty Service for DL Engines & work is done locally in Australia authorised by the DL Factory
Many claim they are factory dealers, but most are not....
Also included:
+ Heavy Duty POWER SWITCH
+ FUEL LINE
+ FUEL DOT
+ KILL SWITCH
+12 Months DL Engines Australia Factory Backed Warranty
+ DL Engines Australia English Instructions
You might find a little bit cheaper elsewhere, but you wont buy better factory backed service for your DL Engine!
Performance:
Output Power: 5.5HP at 7500rpm
Idle Speed: 1350rpm
Maximum Speed: 9000rpm
Static Thrust: 14.2KG at 100 Meters Altitude,
12.5 KG at 1800 Meters Altitude
Dimensions:
Displacement: 55.6cc
Bore and Stroke: 45mmx35mm
Compression Ratio: 7.6:1
Weight: Engine - 1310gram
Exhaust - 100gram
Ignition - 120gram
Requirements:
Fuel: 2C Regular Gasoline mixed 30:1 - 45:1 (Mineral based for break in, synthetic thereafter) Propeller 2 Blade: 22x8; 22x10; 23x8; 23x10 ; Propeller 3 Blade: 20x10; 20x12; 21x11.5N;22x10N Ignition Battery; 4.8 to 6 volts (max) >=1200Mah Spark Plug: NGK CM6 or Equivalent Spark Plug Gap: 0.018: to 0.020" (0.5mm) Installation torque: 7 to 8 ft lbs Configuration: 2 Cycle Air Cooled Walbro membrance pump carburettor with manual choke Automatic advancing (CDI) electronic Ignition Information: The bolts used on the DL50 / DL55 are all 5mm metric sizes. Mounting bolt pattern is 80mm wide and 67mm high (centre to centre) see Mounting Template Distance from back of mounting lugs to face of prop hub is 102mm, and the supplied standoffs are 68mm Total length of motor from back face of stock standoffs to front face of prop hub is 170mm The DL-50 and DLE-55 share the same prop hub and muffler mounting dimensions as the popular DA-50R It is a great way to get into gas powered aircraft without breaking the bank! And if you already have a muffler/header for a DA50/100, it will just bolt straight on.
If you are looking for a 50cc or 100cc size gas engine, that is light weight, powerful, of decent quality the DL is an excellent choice!
Text courtersy of DL Engines Australia
DLE Australia import the engine direct from the factory in China and keep stock locally in Australia.
The engines are unpacked and checked over for defects on arrival into Australia, and then boxed back up with their own English instructions ready for shipping.
|
