1/4 Scale Balsa USA EAA Biplane*
Completely Redesigned and Updated
Our 1/4 scale EAA Bipe is fully aerobatic and uses the same semi-symmetrical airfoil used on the full scale aircraft. With over 1000 sq. inches of wing area with an all up weight of only 8 pounds, our EAA Bipe is a real pussycat in the air. Simple as well as complex aerobatics are easily done, yet the model will slow down to a walk on landing without any tendency to tip stall. Even though this is a scale model, it is still quite easy and straight forward to build. So if you are looking for an excellent first 1/4 scale Bipe at a really great price, our EAA Bipe is for you.
The C.G. or balance point is 4 3/4" back from leading edge
F.A.Q.
Control Throws Elevator: 1/2" Up and Down Rudder: 1" Left and Right Ailerons: 1/2" Up and Down ( Now days I'd recommend about 30~40 % differential)
Kit Features
Revised Rolled Full-size Plans 28 Page Photo Illustrated Instruction Book Brand Name Hardware Pre-bent gear, struts & cabanes AAA Balsa, plywood, & basswood Fall-Out diecut parts Molded ABS cowl Decals
Items Needed to Complete Kit
ITEMS NEEDED TO COMPLETE
3-rolls of 2M Solartex or Aerospan
1- 2oz Gold CA thick or thin
1- quick set epoxy
1-pkg Gold'N' Cable 3'
1-12oz to 16oz fuel tank
6-2/56 12" threaded rods
2-pkg DuBro reg. hinges
1-4" wheels
1-1" tailwheels
1-C.B. Sm. tailwheel assembly
1-2 1/2" spinner
|
Weight
8 lbs. |
Wing Span
60" |
Wing Area
1018 Sq. In. |
Engine
.50 to .80 2-Stroke
.65 to 1.2 4-Stroke |
Length
52-1/2" |
Airfoil
Semi-Symetrical |
Kit No.
449 |
|
|
|
*Kit prices do Not include the Radio Equipment
or the Engine necessary to fly the model.
|
|
